GEOdots Technical specifications
Home > Geobit Product > GEOdots
GEObit introduces a novel, state-of-the-art standalone digitizer developed for seismic monitoring applications and environmental studies. The system uses three 32-bit analog-to-digital converters, achieving a dynamic range of up to 143 dB and supporting selectable sampling rates from 50 to 800 samples per second. The device is based on a high-performance, low-power RISC processor running the proprietary GEObit operating system.
Seismic data are recorded in GBT file format on a removable 64Gb microSD card, fully compatible with both Linux and Windows platforms. Data retrieval is straightforward through direct file transfer from the microSD card, and wireless or wired access via Bluetooth or USB is available if the instrument is deployed underground.
In addition to the three high-resolution seismic channels, the digitizer includes three auxiliary 16-bit channels for seismometer state-of-health parameters monitoring, such as mass position, or any environmental parameters monitoring. It supports locking, unlocking, and centering of broadband seismometers, supporting both active-high and active-low logic to ensure compatibility with the commercial broadband and wideband seismometers. The analog front end offers multiple gain settings. The device integrates a three-axis MEMS accelerometer with a 97 dB dynamic range, allowing simultaneous acquisition of seismic and acceleration data. Accurate timing is provided by a 32-channel GNSS receiver in combination with a TCVCXO clock featuring 0.2 ppm frequency stability.
The digitizer is optimized for ultra-low power operation 0.22 W, which allows continuous operation for up to six months when powered by a 170 Ah zinc–air battery. User interaction is supported through Bluetooth and USB interfaces, with dedicated iOS and Android applications offering real-time data visualization, instrument configuration, SOH monitoring, and seismometer control.
The device measures 110 mm in diameter, 30 mm in height, and weighs only 150 g, enclosed in an IP68-rated hard-anodized aluminum housing, well suited for harsh environmental conditions and underground installations.
GEOdots Technical specifications
⦁ Ultra-low power 0.2W
⦁ High resolution 32bit ADC digitizer.
⦁ Wide input range 40Vpp – 0.1Vpp
⦁ 8 selectable gain steps X1-X128
⦁ Connects to any commercial seismic sensor.
⦁ Three extra analog inputs
⦁ Three TTL command outputs
⦁ Dimensions D=110mm, H=30mm
⦁ 50-800 samples per second
⦁ Stores data files of GBT data format.
⦁ Removable microSD storage unit.
⦁ Fast data retrieval by microSD replacement
or by Bluetooth / USB connection
⦁ Build-in seismometer lock-unlock-centering
⦁ Build-in seismometer mass position monitoring
⦁ Supports seismometer calibration function
⦁ Integrates three axis MEMs accelerometer
⦁ 32channels GNSS and TCXO timing unit
⦁ Aluminum casing, EMI protected, IP68
GEObit introduces a novel, state-of-the-art standalone digitizer developed for seismic monitoring applications and environmental studies. The system uses three 32-bit analog-to-digital converters, achieving a dynamic range of up to 143 dB and supporting selectable sampling rates from 50 to 800 samples per second. The device is based on a high-performance, low-power RISC processor running the proprietary GEObit operating system.
Seismic data are recorded in GBT file format on a removable 64Gb microSD card, fully compatible with both Linux and Windows platforms. Data retrieval is straightforward through direct file transfer from the microSD card, and wireless or wired access via Bluetooth or USB is available if the instrument is deployed underground.
In addition to the three high-resolution seismic channels, the digitizer includes three auxiliary 16-bit channels for seismometer state-of-health parameters monitoring, such as mass position, or any environmental parameters monitoring. It supports locking, unlocking, and centering of broadband seismometers, supporting both active-high and active-low logic to ensure compatibility with the commercial broadband and wideband seismometers. The analog front end offers multiple gain settings. The device integrates a three-axis MEMS accelerometer with a 97 dB dynamic range, allowing simultaneous acquisition of seismic and acceleration data. Accurate timing is provided by a 32-channel GNSS receiver in combination with a TCVCXO clock featuring 0.2 ppm frequency stability.
The digitizer is optimized for ultra-low power
operation 0.22 W, which allows continuous operation for up to six months when powered by a 170 Ah zinc–air battery. User interaction is supported through Bluetooth and USB interfaces, with dedicated iOS and Android applications offering real-time data visualization, instrument configuration, SOH monitoring, and seismometer control.
The device measures 110 mm in diameter, 30 mm in height, and weighs only 150 g, enclosed in an IP68-rated hard-anodized aluminum housing, well suited for harsh environmental conditions and underground installations.
GEOdotD technical specifications
PT Exact Global Teknologi is an Indonesian provider of geophysical and geospatial equipment, as well as the sole distributor in Indonesia for world-leading products such as Guideline Geo (ABEM and MALA), Geobit, Radiodetection, Mageba, Topcon, Comnav and Xenomatix.
Office : Menara Asia Afrika, Jl. Asia Afrika 133-137, 9th Floor, Bandung City, West Java 40112
Workshop : Jl. Paus Dalam No.41, RT.1/RW.7, Rawamangun, Kec. Pulo Gadung, Kota Jakarta Timur, Daerah Khusus Ibukota Jakarta 13220
Whatsapp : 0812-9252-3900 (WA Only)